150 watt IPV 3 by Pioneer4you
This product has been retired
AvailabilityOut of stock
SKU
468
Write Your Own Review
Touch Sensor has been disabled on IPV3
Technical Specs:
Specs | Minimum | Typical | Max |
Output Power | 7 Watts | 150 Watts | |
Output Voltage | 1.0 Volts | 7.0 Volts | |
Output Current | 30.0 A | ||
Atomizer Resistance | 0.1 Ohms | 1.5 Ohms | 3.0 Ohms |
Input Voltage ( Dual-Batteries) | 6.2 Volts | 8.5 Volts | |
Input Current | 1.3 A | 10.0 A | 30.0 A |
Screen On Current | 25 mA | ||
Quiescent Current | 1 mA | ||
Power Down Current | 350 uA | ||
Efficiency | 95% | ||
Screen size | 0.69" OLED | ||
Fire Method | Regular Button | ||
Adjust Power Method | Up and Down Button | ||
Batteries | 2x18650 (not included) | ||
Software Upgrade/GUI operate | YES(YiHi SXi Driver&Upgrade Software) | ||
Charging for Mobile Phone | NO | ||
Protection: | 1. Reverse Polarity Protection | ||
2. Output Short Protection | |||
3. Low Resistance Protection | |||
4. Battery low voltage Protection | |||
5. Temperature overheat protection |
Includes:
1x iPV3 150 Watt Box Mod by Pioneer4You
1x USB Cable for Upgrading not Charging
1x Hex Screwdriver
2x Hex Screws (installed)
2x Extra Phillips Screws
Please Note: It has been brought to our attention that the charge ports on later models has been plugged
Sign In
Create New Account