CLEARANCE Sigelei ZMAX V3- colors
This is a clearance item. These have a DOA return policy only for exchage or store credit. There is no warranty on this product all claims of DOA must be made within 48 hours of delivery. NO CASH REFUNDS WILL BE GIVEN
SIGELEI Zmax V3 is a variable Voltage/Wattage mod. It is telescopic and can use either one 18350, one 18650,
one 18500 or two 18350 batteries.
It can deliver 3.0 to 6.0 Volts or 3.0 to 15.0 Watts.
-Material: 304 stainless steel
-Thread: 510 and ego thread
-Battery: 18350, 18650, 18500
-3.0 to 6.0 Volts, in 0.1V increments
-3.0 to 15.0 Watt, in 0.5W increments
Operation of ZMAX V3:
-Press 5 times continuously to turn on/off the mod.
-Press 3 times to browse the menu when the screen has shut down.
-Choose the menu, wait 2 seconds to get into it and set the item; 2 seconds are needed to get it set and another 2 seconds are required to exit the menu.
-The menu always starts from ‘OUT ON/OFF’.
The menu has 8 different functions:
1. OUT ON/OFF
Disabling the button
The device can be disabled to prevent from unwanted firing by selecting ‘OUT OFF’. When ‘OUT ON’ is selected then the device will work normally and atomizer will fire.
2. VOLTAGE UP
To increase the Voltage from 3.0V to 6.0V in 0.1 Volt increments, or power from 3.0W to 15.0W in 0.5 Watt increments. Select Voltage or Wattage setting in menu 7.
3. VOLTAGE DOWN
To reduce the Voltage from 6.0V to 3.0V in 0.1 Volt decrements, or power from 15.0W to 3.0W in 0.5 Watt decrements. Select Voltage or Wattage setting in menu 7.
4. BATTER VOLTAGE
Battery level indicator
To check the battery voltage. A fully charged battery will have 4.2V. We recommend charging the battery when it falls to 3.3V. Zmax will switch off automatically when the battery level reaches 3.1V.
5. LCD DISPLAY
To select what item to be displayed.
Battery: to display the battery voltage
Voltage: to display the output voltage
Resistance: to display the resistance of atomizer
6. LCD ON/OFF
Switch LCD on/off
When ‘ON’ is selected, the LCD will display your settings when the button is pressed. When ‘OFF’ is selected, the LCD will not display your settings when the button is pressed.
7. POWER VOLTAGE
Select VV or VW
To choose between variable voltage and variable wattage.
Select RMS or MEAN voltage.